G520-1000SM Green Laser Module

1000 mW green laser module with a wavelength of 520 nm.  Minimum output power 800 mW.
SM Series uses multimode laser diodes of leading manufacturers which allows achieving high power and its stability, as well as the reliability of the modules.

$1,349.00 tax excl.


Payment logo

Availability: Lead Time: 4 weeks


SKU: 001207

Technical Data

Beam Height (Measured from Base)
30 mm
Capability for Cooling or Heating
TEC cooled
Design Wavelength
520 nm
Divergence Full Angle
3 mRad
Driver Dimensions
75 x 45 x 39 mm
Input Voltage
7,5 V
Modulation Input Voltage Range
0 - 5 V
Modulation Type
Operating Current Typ [A]
8 A
Operating Temp. Range
+15 to +30 °C
520 nm
Beam size
4.15 x 1.7 mm

Product Description

About the G520-1000SM Green Laser Module

1000 mW green laser module with a wavelength of 520 nm.

The module uses the latest technology of high-power green laser diodes. Thanks to the use of a green laser diode, the module is characterized by much higher power stability than DPSS lasers available on the market. Due to the reduction of the number of elements needed to produce a beam, the system is more reliable, has higher efficiency and extended service life.

Microcontroller driving the laser module is responsible both for the soft start of the laser diode and the regulation of temperature by using a thermocouple. In addition, in the event when adequate heat dissipation of the module is not ensured, the system protects the diode from overheating, and when the temperature of the diode exceeds 40 degrees Celsius, it prevents further current flow through the diode and goes into alarm mode.

With a separate analog part of the laser diode power supply, the laser is able to modulate the beam in accordance with the analog input signal (0-5 V) even at the frequency of up to 100 kHz.

The diode along with the entire optical system is mounted in a stylish housing which ensures both protection and cooling. To enable continuous work of the module, for example in a laser projector, it must be placed on an aluminum plate which allows for heat dissipation (thermal grease significantly improves the cooling of the module). It is a solution that not only saves space in the projector cabinet but also reduces the level from which the beam is emitted. This is aimed at meeting the demands of customers who more often than not look for compact high-power modules.


Write a review