No products
Quantity:
Total:
Total products: (tax excl.)
Total shipping: To be determined
Total: (tax excl.)
Specs: 45W Optical Power, HD 125DPI 180um spot, max wood cutting thickness 20mm (¾” )
Best For: CO2-like Ultra High Speed Cutting and Engraving, Thick Materials Cutting
Specs: 30W Optical Power, HD 125DPI 180μm spot, max wood cutting thickness 6mm (¼”)
Best For: High Speed Cutting and Engraving
Mount not included: This set does not include a mounting bracket. You can either machine your own custom mount or choose a compatible option from our mounts category. Minor adjustments to mounting holes may be required depending on your setup.
Universal PLH3D-15W Laser Upgrade Kit
Specs: 15W Optical Power, HD 125DPI 180um spot, max wood cutting thickness 6mm ( ¼” )
Best For: High Speed Cutting and Engraving
Includes: Parts mentioned below
Mount: Add right one from Mount category
Specs: 6W Optical Power, SD 85 DPI 300um spot, max wood cutting thickness 6 mm (¼”). Liquid cooled
Best For: Standard Engraving, Soft Materials Cutting, MultiPass Material Cutting
Single channel 5 A, 12-48 V, 50 kHz high voltage and power laser diode driver. The driver features two independent power inputs for logic and laser diode sections, enabling the selection of suitable power supply units. Two potentiometers facilitate adjustment of maximum operating current and offset current. An additional monitoring output provides a feedback signal.
The Laser PRO toolhead is compatible with all ZMorph multitool 3D printer models.
NDG7D75 525 nm 1.5 W is the green laser diode - with a wavelength of 525 nm
PLPT9 450LB_E Laser Diode is the 5.0W blue laser diode with a wavelength of 447nm.
HL63373HD Laser Diode is the 1 W red laser diode with a wavelength of 638 nm.
These laser goggles can help reduce the probability of light entering the user’s eye from a diffusely backscattered laser light. This product is OD 5+ over the range of 190 to 470nm and 800 to 1700nm, blocking deep and near ultraviolet and near to mid IR.
The optical system for reducing the divergence of the laser beam. Designed for wide beams RED or 6 W BLUE for example. Lenses have 3 X magnification and the divergence of the beam is also corrected 3 X times.
The optical system for reducing the divergence of the laser beam. Designed for BLUE and GREEN laser beams which have better divergence than RED ones. Lenses have 2 X magnification and the divergence of the beam is also corrected 2 X times.
The 638 nm Wave Rotator Plate 90° is a cost-effective alternative to half waveplates. It efficiently rotates polarization by 90° for the 638 nm wavelength. Used with a Polarizing Beamsplitter (PBS) cube to combine two beams, it enables power scaling while maintaining optical properties.
The 445 nm Wave Rotator Plate 90° is a cost-effective alternative to half waveplates. It efficiently rotates polarization by 90° for the 445 nm wavelength. Used with a Polarizing Beamsplitter (PBS) cube to combine two beams, it enables power scaling while maintaining optical properties.
The 525 nm Wave Rotator Plate 90° is a cost-effective alternative to half waveplates. It efficiently rotates polarization by 90° for the 515 to 532 nm (green light) wavelength range. Used with a Polarizing Beamsplitter (PBS) cube to combine two beams, it enables power scaling while maintaining optical properties.
The 465 nm Wave Rotator Plate 90° is a cost-effective alternative to half waveplates. It efficiently rotates polarization by 90° for the 465 nm wavelength. Used with a Polarizing Beamsplitter (PBS) cube to combine two beams, it enables power scaling while maintaining optical properties.
The 638 nm Wave Rotator Plate 90° is a cost-effective alternative to half waveplates. It efficiently rotates polarization by 90° for the 638 nm wavelength. Used with a Polarizing Beamsplitter (PBS) cube to combine two beams, it enables power scaling while maintaining optical properties.
Dichroic mirrors are used for combining RED or BLUE with the GREEN light.
✔ Aluminium mount for mounting the PLH3D-6W-Series laser heads or LaserDock on X-Carve and Shapeoko CNC machines.
✔ Includes a set of screws.
✔ Aluminium mount for mounting the PLH3D-15W laser head or LaserDock on Stepcraft CNC machines.
✔ Includes a set of screws.
✔ Universal mount for mounting the PLH3D-15W laser heads on i2R, LEAD, LongMill, Onefinity and WorkBee CNC machines.
Enhance your Stepcraft CNC experience with our precision-machined mount, compatible with all models including the D-Series, M-Series, and Q-Series. This mount is specifically engineered for the PLH3D-30W Laser Head, ensuring a seamless integration that simplifies the setup process, resulting in a quick and reliable operation for both cutting and engraving tasks.
PLH3D-6W-XF to PLH3D-6W-XF+ Upgrade Parts Kit allows you to upgrade your old generation XF laser head to the new generation XF+ laser head. This kit will enable you to upgrade your laser with additional accessories such as High-Pressure Air Assist Nozzle and the uSpot Lens Upgrade, both of which allow you to achieve higher throughput and enhanced processing quality.