No products
Quantity:
Total:
Total products: (tax excl.)
Total shipping: To be determined
Total: (tax excl.)
TEC-20A-25V-PID-H is an advanced TEC controller with a microprocessor unit, mounted on a compact heat sink. It operates in cooling mode, improving efficiency and reducing board size. It supports Peltier modules with currents up to 20 A.
PLTB450b 450 nm 1600 mW laser diode is the blue laser diode with a wavelength of 450 nm
Single channel, 5 A, 3.3-12 V laser diode driver. Most basic and versatile laser diode driver dedicated to working with almost all available laser diodes on the market. High current, small size, short rise/fall time and up to 12 V compliance voltage make this driver the best choice for small and medium power applications which require 0 - 5 A working current range.
Single channel 5 A 3.3-24 V laser diode driver with thermal protection. Based on many inquiries from customers, this version of the LPLDD-5A-24V driver is equipped with thermal protection which switches off the laser diode circuit if the temperature exceeds 45 degrees of Celsius. The thermal sensor is included. Additional LEDs signalize the current status of the laser controller.
PLH3D-6W-XF to PLH3D-6W-XF+ Upgrade Parts Kit allows you to upgrade your old generation XF laser head to the new generation XF+ laser head. This kit will enable you to upgrade your laser with additional accessories such as High-Pressure Air Assist Nozzle and the uSpot Lens Upgrade, both of which allow you to achieve higher throughput and enhanced processing quality.
This is Desktop Power Supply Unit for PLH3D-CNC Adapter with EU, US and UK plugs.
✔ Aluminium Clamp Mount for mounting the PLH3D-XT8, XT-50 and XF+ laser heads or LaserDock and LaserDock PRO on Various machines.
✔ Includes a set of screws.
✔ Aluminium mount for mounting the PLH3D-XT8 Laser Head or LaserDock on Mekanika CNC machines.
✔ Includes a set of screws.
Single channel 1.5 A, 3.3-12 V laser diode driver. The low current version of the LPLDD-5A-12V dedicated to working with single and multi-mode laser diodes. Proper shunt resistor and customized parts assure low noise even with small current values. Analog input allows modulating the current with the speed of up to 100 kHz square waves.
✔ Aluminium mount for mounting the PLH3D-XT8, XT-50 and XF+ laser heads or LaserDock and LaserDock PRO on X-Carve Pro machines.
✔ Includes a set of screws.
✔ Aluminium mount for mounting the PLH3D-Series laser head or LaserDock / LaserDock Pro on CNC4newbie CNC machines.
✔ Includes a set of screws.
