No products
Quantity:
Total:
Total products: (tax excl.)
Total shipping: To be determined (tax excl.)
Total: (tax excl.)
Laser module designed with wavelength 405nm and power 3000mW. Typical beam size is 3 x 3.5 mm, with low beam divergence equal to 0.2 x 2.4 mRad.
High power fiber coupled laser module based on semiconductor laser diodes with wavelength 450 nm.
Laser module designed with wavelength 405nm and power 600mW. Typical beam size is 3 x 3 mm, with low beam divergence equal to 0.2 x 0.6 mRad.
Laser module designed with wavelength 450nm and power 20 W. Typical beam size is 7 x 7 mm.
Laser module designed with wavelength 525nm and power 1400mW. Typical beam size is 3.5 x 2.5 mm, with low beam divergence equal to 0.2 x 1.0 mRad.
Laser module designed with wavelength 659 nm and power 1100 mW. Typical beam size is 8.5 x 9.5 mm, with low beam divergence equal to 0.2 x 1.6 mRad.
Opt Lasers' RGB-FS-Series laser modules are built with multiple edge emitting laser diodes inside. These series use spatial, polarization, and spectral beam combining techniques for achieving both high quality and power output beams.
Laser module designed with wavelength 450nm and power 5000mW. Typical beam size is 7 x 8 mm, with low beam divergence equal to 0.2 x 1.0 mRad.
SW-Series Laser Modules is a series of modules with single wavelength (single color) fiber coupled into a multimode fiber. As the light source high power visible laser diode is used. SW - Series laser modules are available in 405nm, 450nm, 520nm and 638nm at various power levels.
Laser module designed with wavelength 638 nm and power 900 mW. Typical beam size is 5 x 5.5 mm, with low beam divergence equal to 0.2 x 1.6 mRad.
Laser module designed with wavelength 450nm and power 1600mW. Typical beam size is 3 x 2,5 mm, with low beam divergence equal to 0.2 x 1.2 mRad.
Universal PLH3D-30W Laser Upgrade Kit
Specs: 30W Optical Power, HD 125DPI 180um spot, max wood cutting thickness 6mm (¼” )
Best For: High Speed Cutting and Engraving
Includes: Parts mentioned below