Looking for the fastest and safest way to add laser cutting and engraving to your Genmitsu CNC? This final part of the guide covers everything you need to know about our Plug&Play laser kits designed specifically for Genmitsu machines — including what’s included, which models they support, and how they simplify the upgrade process.
✅ Why Choose a Plug&Play Kit?
Installing a laser can be confusing if you're sourcing parts separately. That’s why we created Plug&Play kits — complete solutions tailored for Ge [...]
Read more >
After installing the laser and configuring LightBurn, it’s time to ensure that your Genmitsu CNC machine is fully compatible — both electrically and mechanically — with your laser system. In this part of the guide, we'll explain:
Which Genmitsu models are laser-ready
What firmware features are required
How PWM control works with Genmitsu boards
What to avoid for long-term stability and safety
🧩 Is My Genmitsu Compatible with a Laser?
The good news: Most Genmitsu machines are laser- [...]
Read more >
Now that your laser is physically installed on your Genmitsu CNC, it’s time to configure the software. In this part of the guide, we’ll walk you through setting up LightBurn to work seamlessly with your GRBL-based Genmitsu machine and laser head — so you can start engraving or cutting with confidence.
🧠 Overview: Why Software Setup Matters
LightBurn gives you full control over laser speed, power, and motion. But without the correct configuration, your laser may not fire properly, could underperform, or ev [...]
Read more >
Thinking of upgrading your Genmitsu CNC with a laser? Whether you're using the Genmitsu 3018, PROVer, or another model, this step-by-step series will walk you through everything you need to know — from physical installation to software setup, compatibility, and selecting the best Plug&Play kit.
🧰 What You’ll Need Before You Start
To successfully install a laser on your Genmitsu CNC machine, make sure you have the following:
A compatible laser head (e.g., PLH3D-XT-50, PLH3D-6W, or PLH3D-XT8)
A [...]
Read more >
One of the most common questions we hear from Genmitsu users is: “Will my Genmitsu CNC with a laser head cut 3mm plywood?” The answer is: Yes — but with the right setup and expectations.
Let’s break down what you need to make it work effectively and what results you can realistically expect from a diode laser on a Genmitsu platform.
⚙️ Genmitsu + Diode Laser – Capabilities
Most Genmitsu models (like the 3018-PRO and PROVer) are not built for raw cutting power — but with a properly configured 6W or 10W [...]
Read more >
