PLH3D-2W Engraving Laser Head

Smallest but still powerful laser head from PLH3D series. PLH3D-2W is a medium power laser head equipped with 450 nm laser diode and high-resolution lens. Compact design and very lightweight (70 grams) allow installing the laser head even in small and delicate machines. Driver equipped with LED informs the user when the laser head is armed.

In stock

$299.00

PCS

SKU: 001633

GTIN: 5902693110897

Manufacturer:

Technical Data

Dimensions
30 x 30 x 68,5 mm
Focus Distance
20 - 120 mm
Focused Beam Spot Size @ 50 mm
0,1 x 0,1 mm
Focused Beam Spot Size @ 80 mm
0,1 x 0,18 mm
Input Voltage
12 V
Max. Power Consumption
15 W
Modulation Input Voltage Range
0 - 5 V
Modulation Type
Analog / TTL
Mounting Hole Spacing
20 mm
Noise
23 dBA
Weight
70 g
Max. Laser Diode Optical Power
2 W

Product Description

About the PLH3D-2W engraving laser head

PLH3D-2W is the medium power 2W professional engraving laser head. This laser head allows to cut or engrave materials such as wood, paper, leather, cardboard, and many others.

Factory set lens - the engraving laser head is shipped the High-Resolution Triplet lens installed and adjusted to focus at 60.0 mm (measured from the front-face surface of the laser head to engraving plane). This focal distance has a well-optimized focal spot size which is suitable for many engraving and cutting applications. This is the best-optimized focus distance to start with! 

This lightweight 70-gram laser head doesn’t require any additional cooling. Fan design makes it work as a fully customized air nozzle protecting the lens from dirt and cooling the laser head. PLH3D-2W works with common 12 V power supply (min 1.5 A current).

The driver is equipped with an LED indicator, which displays all the required information. The temperature control system would turn off the laser head in case of exceeding critical temperature. The small-sized driver attached directly to the laser head improves the speed of diode modulation. This also allows connecting longer cables to the head.

Analog modulation enables the user to control the laser power. 0 V = laser OFF, 5 V laser ON, 2 V ~40% power. This can also work as TTL using a voltage from 0 to 5 V.

In order to modulate power through PWM, the base frequency has to be set between 5 and 10 kHz. Conducted thermal tests on several prototypes allowed us to optimize the radiator’s shape and enable efficient cooling, keeping up with a small size of the device. Besides the standard functionality, small sized laser spot gives the possibility to illuminate plates, covered with a photosensitive surface, which gives a chance for very quick PCB prototyping.

 

For bulk orders, PLH3D can be customized to all customers’ needs. The supply voltage may be switched to 24 V. We can add customers’ logos and all possible additional features.

 

Main advantages of the PLH3D-2W laser head:

- Customization offer for all 3D printers and CNC machines producers

- No need for additional cooling

- Simple installation to all 3D printers and CNC routers

- The driver attached to the head

 

Our PLH3D series can work with different CNC and 3D printing machines such as:
 
CNC Shark 
GeckoDrive 540
MYDIYCNC
Openbuilds – C Beam/OX
Shapeoko 2
Shapeoko 3
Stepcraft
X-Carve Upgrade
X Controller
Zen Toolworks
Azteeg X3 
Lulzbot 
MakerBot Thing-O-Matic
MakerBot Replicator1 and Clones
MakiBOX
MakerGear M2
PrintRBot Upgrade
Replicator 2 and 2X 
RepRap – Melzi Board
RepRap – RAMPS1.4 
RepRap – RUMBA
Rigidbot
Solidoodle
Ultimaker 1 & 2
Velleman K8200

Protection

The PLH3D-2W engraving laser head has a thermal protection system which protects laser diode from overheating.

The analog input is protected by a 5V1 Zener diode on occasion there appears the voltage higher than 5V. Despite everything, this input should not be used with higher voltages.

The output of the driver is protected by Schottky diode which doesn't allow the reverse voltage to appear.

Caution:

  • Remember that it is not a toy.
  • Laser radiation is dangerous even when scattered or reflected from any surface.
  • Always use proper protection laser filter on your CNC machine dedicated to 430 - 480 nm in order to avoid reflected radiation.
  • Never point laser head at people or animals.
  • Do not touch the beam, it may cause burns.
  • Do not stare at the beam or the beam spot while the material is being cut.
  • Laser radiation - Avoid eye or skin exposure to direct or scattered radiation. 
  • Class 4 laser product.

Accessories

  • $22.00 In stock

    This Mounted Aspheric lens is useful to collimate or focus laser light in the visible wavelength regime. The aspheric design nearly eliminates spherical aberration without needing multiple optical elements. It has a broadband AR coating of 400-700 nm, allowing it to be used ...

    $22.00
    PCS Add to cart
    In stock
  • $18.00 In stock

    This Mounted Triplet lens can be used to variably focus or collimate the laser light with reduced aberration due to its triplet (three element) design. Its relatively long effective focal length (EFL) of 8 mm allows it to focus laser light to a small spot.

    $18.00
    PCS Add to cart
    In stock
  • $15.00 In stock

    This DC-DC Converter helps to change 24 V into 12 V. It is designed to PLH3D series.

    $15.00
    PCS Add to cart
    In stock

Reviews

Write a review

7 other products in the same category: