LongMill CNC Mount for PLH3D-15W Engraving Laser Head

This mount allows you to easily add laser processing capabilities of PLH3D-15W to LEAD, WorkBee, Onefinity, I2R and LongMill CNC machines. It allows you to mount your engraving laser in front of your CNC router.

$99.00 tax excl.

PCS

Payment logo

Manufacturer:

SKU: 002830

GTIN: 5902693110491

Product Description

Features of the Universal I2R, LEAD, LongMill, Onefinity and WorkBee CNC Mount for PLH3D-15W Laser Head



This mount requires 2 to 4 screws to be mounted on your CNC machine and four additional M5 12mm (M5x12) screws to attach the PLH3D-15W engraving laser to the mount. The screws (and nuts in case of I2R CNC machine) required to install this mount on you CNC machine are as follows:


  • For I2R CNC: Four M3x8 Screws and four M3 Nuts. The location where you need to screw them is shown in blue in the image below. Light blue is for older versions of I2R CNC, while the dark blue denotes the screw hole location you should use if you have the new version of I2R CNC (available from 2022).
  • For LEAD CNC: Two M5x6 Screws. The location where you need to screw them is shown in dark grey in the image below.
  • For LongMill CNC: Two M5x6 Screws. The location where you need to screw them is shown in dark grey in the image below.
  • For Onefinity CNC: Two M5x8 Screws. The location where you need to screw them is shown in green in the image below.
  • For WorkBee CNC: Two M5x6 Screws. The location where you need to screw them is shown in dark grey in the image below.

The picture below shows the locations of the dedicated screw holes that you need to use for your CNC machine. It also shows where you need to screw your PLH3D-15W engraving laser head:


Universal PLH3D-15W Laser Mount for I2R, LEAD, LongMill, Onefinity and WorkBee CNC Machines

Reviews

Write a review