Manual is compatible with mthe following WixHC CNC Controller models: MK3-V (3-Axis) XHC CNC Ethernet Controller, MK4-V (4-Axis) XHC CNC Ethernet Controller, and MK6-V (6-Axis) XHC CNC Ethernet Controller.
These controllers can also be called WixHC Mach3 USB Motion Cards.
1. Adapter connection
2. Laser head only connection
Please only use a single signal input of the laser head. Do not connect the signal output from the controller to PWM and Analog inputs at the same time.
Adapter setting:
For the connection showed above you have to use program 0 of the Adapter, which should look as on the picture below. To find information about checking and changing the adapters program please look into our guide for PLH3D-CNC Adapter or check our instructional video.