400mW micro RGB laser module

This is a professional 400mW full RGB laser module. It is built using brand new laser diodes and high performance optics.

Reference: 001311

EAN13: 590269311079

Manufacturer:

Available quantity: Lead Time: 4 weeks

    $539.00 tax excl.

    Accessories

    Technical Data

    Beam Diameter at Aperture5 mm
    Beam Height (Measured from Base)18,5 mm
    Dimensions44 x 39 x 27 mm
    Divergence Full Angle0,8 mRad
    Driver Dimensions62 x 21 mm
    Driver Mounting Hole Diameter40 mm
    Max. Modulation Frequency100 kHZ
    Modulation Input Voltage Range0 - 5 V
    Modulation TypeAnalog / TTL
    Optical Power @ 20°C [mW]400 mW
    Power @ 20°C 445nm Laser90 - 120 mW
    Power @ 20°C 520nm Laser90 - 120 mW
    Power @ 20°C 638nm Laser140 - 160 mW

    More info

    This is a professional 400mW full RGB laser module. It is built using brand new laser diodes and high performance optics.

    Diodes used in this module:

    100mW 520nm diode

    100mW 450nm diode

    185mW 638nm diode



    The dimensions of the module are 44x39x27 mm. It is possible to mount the module on the baseplate using four M3 screws. Total optical power is up to 400mW and not less than 350mW.

    The module is controlled by professional three-channel driver. Each channel is independently controlled by the analog input of (0 - 5V). Analog input allows for the modulation of the current flowing through the diode up to 100kHz.

    Recommendations and requirements

    Modulation inputs can be used as TTL inputs with its logic levels of 0V and 5V or as an analog input. Analog modulation means that by using 2,5 V on ANG input you get 50% output power, analogically by using 4 V you get 80% output power, etc.