Connection for Prusa i3 MK2.5S 3D Printer and LulzBot Mini 3D Printer:

You need to connect TP23 to the Inverted PWM input of the Adapter, and pin 7 (GND) from p3 to the Ground input of the Adapter.


Adapter setting:

For the connection showed above you have to use program 0 of the Adapter, which should look as on the picture below. To find information about checking and changing the adapters program please look into our guide for PLH3D-CNC Adapter or check our instructional video.

PLH3D-CNC Options