600mW 405nm Free Space Laser Diode Module
Laser module designed with wavelength 405nm and power 600mW. Typical beam size is 3 x 3 mm, with low beam divergence equal to 0.2 x 0.6 mRad.
Warning: Last items in stock!
Availability: Lead Time: 4 weeks
Manufacturer: Opt Lasers
Opt Lasers 600mW 405nm Free Space Laser Diode Module features excelent divergence and beam size specifications. Laser diode driver prowided with this module ensures precise controll of laser diode current, while maintaining high speed modulation. Precise controll of temperature of laser diode housing greately improves power stability and ensures long lifetime of the laser diode. This combination of beam specifications and current, temperature controll makes this module a perfect choice for both scientific and industrial aplications.
Because specifications for each module can be slightly different Opt Lasers privides characteristic card with measured power, wavelenght, spectral width, peak-to-peak and RMS power stability over 8h, and beam profiles for each module.
Cooling platform and PSU for this module are available for this module. If you want to add them to your orther or have any other questions feel free to contact us.
Read more about free space laser diode modules.
- Small beam size
- Low divergence
- High Optical Stability
- Active cooling
- Long Lifetime
- High speed modulation
- UV curing
- Laser pumping
|Typ. Center Wavelength [nm, ±3]||402|
|Output power [mW]||600|
|Typ. Beam Size [mm, @ 1/e2]1||3 x 3|
|Typ. Full Angle Beam Divergence [mRad, @ 1/e]1||0.2 x 0.6|
|Typ. Spectral line width FWHM, nm [nm, @ FWHM]||1|
|Min. Polarization Extinction ratio||1:100|
|Peak-to-peak Power Stability Over 8h, %2||0.9|
|RMS Power Stability Over 8h, %2||0.13|
|Lifetime [h]||10 000|
|Modulation Input [V, Analog]||0-5|
|-3 dB Bandwidth Modulation [kHz]||600|
|Softstart Time [ms]||2000|
|Rise Time [ns]3||250|
|Fall Time [ns]3||150|
|Signal To Rise Start Delay [ns]3||400|
|Laser Diode ESD Protection||YES|
|Cooling Method||Active - TEC|
|Operating Temperature [°C]||10 - 35|
|Dissipated Power [W, bottom surface]||<20|
|Max power consumption [V x A]||7.5 x 7|
|Module dimensions (L x W x H) [mm]||129 x 59 x 41|
1 Vertical x Horizontal.
2 Test performed in 22°C ±2 ambient temperature using an optical power meter with an input bandwidth of 100 Hz. Power was measured every 6 seconds
3 Measurement performed with 100kHz frequency.
Measurement of the rise/fall laser module properties with 100kHz frequency. Yellow: analog signal; Blue: Driver current measured on the resistor; Pink: Light measured with photodiode