PLH3D-Series Lens Adjuster for High-Resolution Lens

This is a tool designed for adjusting the focus of the laser beam on our PLH3D-Series with the High-Resolution Lens. It is valuable to quickly change the focus of the beam when a different working distance or focus spot size is desired, often depending on the material properties or other constraints of the application. 

In stock

$25.00

PCS

SKU: 001914

GTIN: 5902693111184

Manufacturer:

Technical Data

Material
Aluminium
Weight
1,5 g

Product Description

About the PLH3D Lens Adjuster

  • Compatible with PLH3D-Series Laser Heads using the High-Resolution Three-Element Lens
  • Adjust the beam spot size and working distance without any additional tools
  • Machined from 6000-Series Aluminum

This accessory tool is intended for adjusting the focus of High-Resolution 450 nm Mounted Triplet Lens, which is included with many of our PLH3D-Series laser heads, as well as available as a separate accessory.

It is useful to quickly change the focus of the beam when a different working distance or focus spot size is desired, often depending on the material properties or other constraints. A smaller beam spot (shorter working distance) is often used for higher resolution engraving, higher speed engraving, cutting materials that are either, or any time a higher power density is preferred. A larger beam spot is typically favored for engraving a wider line, cutting a thicker material or when a longer working distance is needed.

Accessories

  • $18.00 In stock

    This Mounted Triplet lens can be used to variably focus or collimate the laser light with reduced aberration due to its triplet (three element) design. Its relatively long effective focal length (EFL) of 8 mm allows it to focus laser light to a small spot.

    $18.00
    PCS Add to cart
    In stock

Reviews

Write a review

27 other products in the same category: